Mourilyan · Case study
Split system cleans in Mourilyan. Back to bright metal.
Stop by stop
5 stops on the job
-
Covers offCovers off
Front cover and filters off to get a proper look at the coil.
-
Packed solidPacked solid
Thick grey and brown dust, lint and debris matted across the face of the coil.
-
Drain trayDrain tray
On some units the drain tray was sitting under a layer of dust as well.
-
HalfwayHalfway
One side still grey and matted, the other back to bright metal.
-
Clean coilClean coil
Caked dust gone and the fin surfaces exposed again.
Drag to compare
Packed with lint, then clean

The tricky bit
Dirt caked into the fins
The dirt on these was clumped and caked into the fins, so it took a proper chemical wash to shift it.
The result
Running clean
The coils that came in packed with grey lint and dust ended up clean, with the fin surfaces showing bright metal again. Covers and filters went back on, and the units were running clean when we finished.
Running 20 Jul 2026
- System
- Wall-mounted split systems
- Where
- Mourilyan
Full job notes
From coils packed with grey lint to clean, bright fins
These split system cleans in Mourilyan came to us with the indoor units running dirty. When we opened them up, the evaporator coils were packed with thick grey and brown dust, lint and debris. The fins were matted right across the face of the coil.
We pulled the front covers off first. Then out came the filters so we could get a proper look at the coils behind them. On some units the drain tray and fan barrel were sitting under a layer of dust as well.
With the covers off, we ran a chemical clean through the coils. The dirt on these was clumped and caked into the fins, so it took some work to shift. Halfway through you could see the difference. One side of the coil still grey and matted, the other side back to bright metal. That contrast is the clearest way to show what was actually stuck in there.
We worked across the fins until the caked dust was gone and the fin surfaces were exposed again. The coils came up clean, with the metal showing through where the debris used to sit. Once the coils were done we refitted the filters and front covers.
Dirty coils make a unit work harder and push dust back into the room every time it runs. A clean coil moves air the way it's meant to. It's straightforward work, but it makes a difference to how the unit runs.
We cover this sort of work across the district. If you want to see other jobs in the area, have a look at our projects in Innisfail. We also do split system installs, like this air conditioning install in El Arish.
These cleans were a good example of how much builds up inside a wall unit before anyone notices. The units were back together and running clean by the time we packed up.
Chemical coil clean
The coils were treated with a chemical clean to shift dust and lint packed into the fins. The dirt was clumped hard into the coil, so it took a proper wash to clear it.
Coils exposed for access
Front covers and filters came off each unit so we could reach the evaporator coils and the fan barrel end behind them.
What we did
- Removed front covers and filters to expose the evaporator coils
- Assessed coils heavily fouled with grey lint, dust and debris
- Ran a chemical clean through the coil fins
- Cleaned caked dust from the fin surfaces back to bright metal
- Refitted filters and front covers
When was yours last cleaned?
Dust blowing out every time it runs?
Need your split systems cleaned? Get in touch for a quote.
Call for an on-site quote 0459 737 893
Next job
Old Under-Ceiling AC Removed and a Mitsubishi Heavy Industries 12.5kW Installed at a Gym in Innisfail →















